Go Foil Pedestal Leveling Shims for Standard 30mm Spaced Tails

This adapts the angle of KD Maui, Unifoil, Foilparts, Onofoil, and other syandard 30mm spaced tails to have the correct angle when mounted on a Stock Go Foil Pedestal.

(Shown With Bottom Mount Pedestal. This will work the best. Top mount may not work properly.)

Fine-tune your hydrofoil setup for the perfect balance of carve and glide. 

Fits: Stock Go Foil Bottom Mount Pedestal. May work for the top, but not as well since the tails this is made for are bottom mount.

Tail Spacing: 30mm.

Shims at 1/4 Degree Increments

Angles Included: 1.25, 1.5, 1.75 (neutral), 2, 2.25, and 2.5 Deg

Notes: Tail may need to be drilled out very slightly. I used a 5/16" drill bit, but use a smaller one if you can. Depending on the tail it may not need drilling. 

Color May Vary